Description
The 3500/64M Dynamic Pressure Monitor is a single slot, fourchannel monitor that accepts input from high temperature pressure transducers and uses this input to drive alarms. The monitor’s one measured variable per channel is bandpass dynamic pressure.
You can use the 3500 Rack Configuration Software to configure the bandpass corner frequencies along with an additional notch filter. The monitor provides a recorder output for control system applications.
The primary purpose of the 3500/64M Dynamic Pressure Monitor is to provide the following:
l Machinery protection by continuously comparing monitored parameters against configured alarm setpoints to drive alarms
l Essential machine information for operations and maintenance personnel
Each channel, depending on configuration, conditions its input signal to generate various parameters called measured variables. You can configure alert and danger setpoints for each active measured variable.
Ordering Information
For the detailed listing of country and product specific approvals, refer to the Approvals Quick Reference Guide (108M1756) available from
Bently.com.
Dynamic Pressure Module
3500/64 - AA - BB
A: I/O Module Type
01 I/O Module with Internal Termination
02 I/O Module with External Termination
B: Agency Approval
00 None
01 cNRTLus (Class I, Division 2)
02 ATEX / IECEx / CSA (Class I, Zone 2)
External Termination (ET) Blocks
Part Number Description
128015-09 Dynamic Pressure ET Block Terminal Strip connectors
125808-09 Dynamic Pressure ET Block Euro Style connectors
128710-01 Recorder Out ET Block Terminal Strip connectors
128702-01 Recorder Out ET Block Euro Style connectors
Cables
3500 Dynamic Pressure Signal to External Termination Block Cable
129525 - AAAA-BB
A: I/O Cable Length
0005 5 feet (1.5 metres)
0007 7 feet (2.1 metres)
0010 10 feet (3.0 metres)
0025 25 feet (7.6 metres)
0050 50 feet (15.2 metres)
0100 100 feet (30.5 metres)
B: Assembly Instructions
01 Not assembled
02 Assembled
3500 Recorder Output to External Termination Block Cable
129529-AAAA-BB
A: I/O Cable Length
0005 5 feet (1.5 metres)
0007 7 feet (2.1 metres)
0010 10 feet (3.0 metres)
0025 25 feet (7.6 metres)
0050 50 feet (15.2 metres)
0100 100 feet (30.5 metres)
B: Assembly Instructions
01 Not assembled
02 Assembled
Spares
Part Number Description
176449-05 3500/64M Dynamic Pressure Monitor
140471-02 I/O Module Internal Termination
140482-02 I/O Module External Termination
143729-01 Cylinder Pressure I/O Internal Termination
04425545 Grounding wrist strap
04400037 IC Removal Tool
00580434 Connector Header Internal Termination 8 position, Green
00580436 Connector Header Internal Termination 6 position Green
00502133 Connector Header Internal Termination 12 position Blue
166M2389 Connector Header Push-in-Spring Type (Alternative for PN 00580434)
166M2388 Connector Header Push-in-Spring Type (Alternative for PN 00580432)
