Ordering Information
For the detailed listing of country and product specific approvals, refer to the Approvals Quick Reference Guide, Document 108M1756, at Bently.com.
Ordering Information for Probes
3300 XL Standard Extension Cable
330130-AAA-BB-CC
Make sure that the extension cable length and the probe length, when added together, equal the Proximitor Sensor total length.
A: Cable Length Option
030
3.0 meters (9.8 feet)
035
3.5 meters (13.1 feet)
040
4.0 meters (11.5 feet)
045
4.5 meters (14.8 feet)
060
6.0 meters (19.7 feet)
070
7.0 meters (22.9 feet)
075
7.5 meters (24.6 feet)
080
8.0 meters (26.2 feet)
085
8.5 meters (27.9 feet)
B: Connector Protector and Cable Option
00
Standard cable
01
Armored cable
02
Standard cable with connector protector
03
Armored cable with connector protector
10
FluidLoc cable
11
Armored FluidLoc cable
12
FluidLoc cable with connector protector
13
Armored FluidLoc cable with connector protector
C: Agency Approval Option
00
Not required
05
CSA, ATEX, IECEx Approvals
Description
The 3300 XL 8 mm Proximity Transducer System consists of:
o One 3300 XL 8 mm probe,
o One 3300 XL extension cable1, and
o One 3300 XL Proximitor Sensor2.
The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values. The system’s primary applications are vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements3.
The 3300 XL 8 mm system delivers the most advanced performance in our eddy current proximity transducer systems. The standard 3300 XL 8 mm 5-meter system also fully complies with the American Petroleum Institute’s (API) 670 Standard (4th Edition) for mechanical configuration, linear range, accuracy, and temperature stability. All 3300 XL 8 mm proximity transducer systems provide this level of performance and support complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need to match or bench calibrate individual components.
Each 3300 XL 8 mm Transducer System component is backward compatible and interchangeable4 with other non-XL 3300 series 5 mm and 8 mm transducer system components5.
This compatibility includes the 3300 5 mm probe, for applications in which an 8 mm probe is too large for the available mounting space6,7.
Extended Temperature Range Applications
An extended temperature range (ETR) probe and ETR extension cable are available for applications in which either the probe lead or extension cable may exceed the standard 177 ˚C (350 ˚F) temperature specification. The ETR probe has an extended temperature rating for up to 218 ˚C (425 ˚F). The ETR extension cable rating is up to 260 ˚C (500 ˚F). Both the ETR probe and cable are compatible with standard temperature probes and cables, for example, you can utilize an ETR probe with the 330130 extension cable. The ETR system uses the standard 3300 XL Proximitor Sensor. Note that when you use any ETR component as part of your system, the ETR component limits the system accuracy to the accuracy of the ETR system.
